Miele Blizzard CX1: two-minute review
Product note
The Miele Blizzard CX1 range is available in multiple territories, but in various different configurations. These have the same base model, but different tools and accessories. For this review, I tested the Blizzard CX1 Flex.
The Miele Blizzard CX1 is a bagless cylinder vacuum that plugs in via a power cable for endless vacuuming time. It offers four suction levels and four vacuuming accessories in addition to the main floorhead.
Miele is a German brand with a reputation for quality across many appliance categories. And since it’s been making vacuums for around 100 years, it knows a thing or two about designing the best vacuum cleaners. Miele offers two distinct ranges of bagless plug-in cylinder vacuums, the Miele Blizzard CX1 range and the Miele Boost CX1 range.
There are a few different CX1 options which use the same base model but have different tools and accessories. For this review, I tested the CX1 Flex.
On the whole, its size, coupled with features like its large dust canister make it well suited to larger homes. And while performance was good, it’s not the best I’ve tried on carpet and it isn’t suited to homes with pets either. But it’s quiet and easy to use, plus the super long flexible crevice nozzle allows you to clean those awkward, tight spaces between your large appliances and the wall.
Miele Blizzard CX1 review: price & availability
- Various options in Blizzard CX1 range, depending on territory
- Price: $479-$999 / £429-£499 / AU$849
The Miele Blizzard CX1 range is available in multiple territories, but exactly which models you can get depends on where you live.
For this review, I tested the Miele Blizzard CX1 Flex, which is only available in the UK, and costs £429. It can be bought directly from Miele, or via large electrical retailers such as Currys or Hughes. In the UK there are four Miele Blizzard CX1 vacuums ranging from £429 to £499 and at the time of writing some of them were available at a discounted price, so it’s worth shopping around, especially around the time of seasonal sales.
In the US there are three Miele Blizzard CX1 models, which have the same main vacuum as the one I tested, but different accessories and floorheads. They range in price from $479 to $999.
In Australia there’s one model available, it’s the Miele Blizzard CX1 Cat & Dog Powerline and it’ll set you back AU$849. Take a look at the Miele website in your country, for more details on the models available.
No matter which model you go for, the Blizzard CX1 is in the premium price bracket, and while that’s not unexpected for this brand, I think it’s a little overpriced given the overall performance.
- Value for money score: 3.5 out of 5
Miele Blizzard CX1 specs
| Dimensions (main vacuum): | 51.5 x 31 x 29cm/ 20.3 x 12.2 x 11.4 inches |
| Weight: | 8.4kg / 18.5lbs |
| Cord length: | 7.5 meters / 24.6ft |
| Bin size: | 2L |
Miele Blizzard CX1 review: design
- Big and bulky for a cylinder vacuum
- Not all tools stored on board
- Good size dust canister
When I first removed the Miele Blizzard CX1 Flex from its box I was surprised at how chunky it felt. And maybe that is in part because I’ve just reviewed the super compact Miele Boost CX1, nevertheless it’s worth checking out the dimensions if you’re short on storage space.
The cylinder itself measures 51.5 x 31 x 29cm/ 20.3 x 12.2 x 11.4 inches (h x w x d) when stood upright on its end. The advantage of a larger vacuum is usually a larger dust canister and the Miele Blizzard CX1 has an ample 2 liter bagless canister. Though I would argue that its 7.5 meter/ 24.6ft power cord is on the short side.
This particular model comes with an upholstery nozzle and crevice tool, both of which are stored on board the vacuum, at the back. There’s also a dusting brush, which frustratingly isn’t stored on the vacuum. And lastly, there’s an extra long and bendy crevice nozzle that’s ideal for reaching down the sides of large appliances such as a fridge or dryer.
The crevice nozzle is what makes this the Flex model, the standard UK Miele Blizzard CX1 is exactly the same but without the flexible crevice nozzle. Other models in the range include different floorhead types such as parquet floorhead for very delicate hard floors, or a motorized floorhead for optimized pet hair pickup.
Image 1 of 2
The floorhead included with this model is called an EcoTeQ floorhead and Miele describes it as being designed for energy efficient vacuuming with maximum cleaning. For the best performance cleaning carpet and collecting pet hair, you’ll need to fork out for the top-of-the-range Miele Blizzard CX1 Cat & Dog model which comes with the motorized floorhead.
The controls are very simple, there are just two buttons and a dial on the body of the vacuum. The power button and the cord rewind button can both be foot operated to avoid the need to bend down. But when you want to switch between the four suction levels you will have to bend down to adjust the dial.
The only other control is the foot pedal located on the floorhead. The position of this switch dictates the position of the brushes on the underside of the floorhead, and you have to adjust it depending on whether you’re vacuuming carpet or hard floors.
Between the floorhead and the handle is a telescopic wand, which is an adjustable height tube. That means you can adjust it to suit your height, or, if you’re trying to reach under furniture, you can extend it to lengthen the reach.
The dust canister lifts straight up and out of the vacuum simply by grabbing its handle and pulling upwards. Then it’s easily emptied by pressing the bright yellow release button which flips open the bottom of the dust canister, allowing all the dirt and debris to fall directly into your bin.
Once the dust canister has been removed and emptied, there are two filters inside it that can be cleaned periodically. The filter frame slides out from inside the canister and the pre-filter can be found at the back of the canister. Both should be cleaned when obviously dirty by removing dust and rinsing.
The main fine dust filter can be removed and cleaned manually in water. But it also has a handy self clean function called ComfortClean. When it reaches a specified degree of soiling, the vacuum will switch off for around 20 seconds and carry out this cleaning process. Or, you can start the ComfortClean process simply by pressing the ComfortClean button.
Miele Blizzard CX1 review: performance
- Quiet in use
- Not effective at hair pick up on carpet
- Excellent edge cleaning
In general I found the suction to be effective on all hard floors and was particularly impressed when I tested the pickup at the sides of the floorhead. I did this by sprinkling flour along baseboards and no matter which side of the floorhead I vacuumed with, the results were flawless and no flour was left lingering at the edges of the room.
Due to there being no brushes at the front of the floorhead, it does feel like it clatters along on my uneven, rustic slate tiled floors as opposed to gliding smoothly. And if I had very expensive or delicate hard floors, this might concern me more. On my wood floors, which are flat and not uneven, it glides more smoothly.
To test the performance on very fine particles I dusted flour onto my hard floors and vacuumed it back up again. For the most part it collected the flour in one sweep. On wood floors it collected all the flour that had settled into the grooves between the boards but I could see that some flour was still embedded into the wood grain and this took a couple of sweeps to remove.
Depending on the direction I vacuumed towards the flour it did sometimes push a small pile of flour out in front of the floorhead. It was swiftly and easily sucked up by approaching it from a different angle, but I’d prefer this didn’t happen in the first place.
Overall pickup on carpet was good, but it wasn’t faultless. I’ve got both a wool carpet and a synthetic carpet. On the synthetic carpet the suction felt really strong and I had to turn it down in order to actually be able to vacuum the room. It left the floors looking very clean.
On the less fluffy wool carpet, suction was fairly decent and having just reviewed the Miele Boost CX1, I do think the Blizzard CX1 offers better suction on carpet. But it still didn’t feel like it was giving the carpet a thorough clean; I’d much prefer a motorized floorhead.
Picking up hair was effortless on hard floors, but on carpet, the hair got dragged around and clumped up before eventually being sucked into the vacuum after several passes. If you’ve got pets and carpet, you’ll find models better suited to your needs in TechRadar’s guide to the best vacuums for pet hair.
The body of the vacuum could just about balance on a step when vacuuming stairs, but it hangs over the edge of the step. So in all honesty it’s a bit too big, and I didn’t feel confident that it wouldn’t topple. I found it best to move it up with me one step at a time and position my body in front of it, so it could only tilt into me and not fall.
By attaching the main floorhead directly to the handle, I found vacuuming stairs to be pretty quick and easy. When needed I could grab the crevice tool from its position onboard the vacuum to easily get into corners and edges.
I like the long crevice nozzle that gave me the opportunity to vacuum some areas that I can’t normally get to with most vacuums. Awkward thin gaps like down the sides of my washing machine were finally within reach. Admittedly, I couldn’t easily see how well it was doing, but I could hear debris being sucked up the pipe so it’s safe to assume these areas were left cleaner than they started.
The upholstery tool is a bit basic in my opinion and it’s also very small. And I found it frustrating that unless I remembered to push it very firmly into place, it would end up falling off mid-use. Having said all that, it works fine for sprucing up sofas and chairs.
The dusting brush is good and effective. I like that by twisting it, the angle of the brush adjusts, so you can set it up perfectly for the job at hand. It made short work of dusting a huge shelving unit in my living room.
Overall, in my small home with its cottage proportions, this cylinder vacuum was quite simply too bulky. In tight spaces it can feel like the vacuum itself is always in the way. It was much more at home and user-friendly in larger, more open spaces.
In the car I was able to use the main floorhead to clean the boot, but had to switch to the upholstery tool for most other jobs including the seats, mats, and carpet. The issue is that it’s a very basic and small upholstery tool, so this took a bit of time.
The crevice nozzle was able to reach down most of the awkward gaps. For the really hard-to-reach spots, I got out the long bendy nozzle and it managed to reach some areas down the sides of the seats that have long been neglected. The dusting brush was useful for the dashboard and other hard surfaces.
Even on maximum suction, this is a quiet vacuum. On carpet it averaged 70-75dB and it was slightly louder on hard floors at 75-80dB. The noise level decreases as you decrease the suction, so even though it’s not particularly loud, you can still make it quieter.
In practice, emptying the dirt was straightforward, though when the base of the canister flipped open, it often didn’t open up as wide as it could, and in these instances some dust and debris would settle on it and need a quick shake to remove.
- Performance score: 3.5 out of 5
Should you buy the Miele Blizzard CX1?
| Attribute | Notes | Rating |
|---|---|---|
| Value | In the context of the wider vacuum cleaner market it’s a mid-price model. But for a plug-in canister vacuum it’s pricey. | 3.5/5 |
| Design | Simple settings and easy maintenance, but it’s bulky and some tools are a bit basic. | 4/5 |
| Performance | Good performance on hard floors, but not suited to pet hair pick up or deep cleaning carpets. | 3.5/5 |
Buy it if…
Don’t buy it if…
How I tested the Miele Blizzard CX1
In my career testing and reviewing home appliances I’ve tried out well in excess of a hundred vacuums. This gives me a pretty good understanding of what makes a good vacuum and what features and design details will quickly become annoying.
I set up this vacuum in my own home and used it for my regular cleaning tasks. Not only that, but I cleaned my car with it, and set up some tests to see how well it performed very specific tasks such as cleaning right up to the edges of a room.
I also checked the noise level, maneuverability and comfort in use. Furthermore I checked that any maintenance wouldn’t be too complicated or overwhelming, and that emptying out the dirt would be easy and mess-free.
Read more about how we test vacuum cleaners.
- First reviewed November 2024